iNELS Wiki
iNELS Bus
IntroductioniNELS BusINELS News and UpdatesINELS Cloud
iNELS Bus
IntroductioniNELS BusINELS News and UpdatesINELS Cloud
  • Introduction
    • What is iNELS Bus
    • Key features of iNELS Bus
    • iNELS BUS Technology.
    • iNELS Bus communication
  • Technical manual: Products
    • Detectors
      • DLS3-1
      • MCD3-01
      • PMS3-01
    • Converters
      • ADC3-60M
      • DAC3-04M
      • IBWL3-20B-SL
    • Switching Actuators
      • SA3-01B/SA3-02B
      • SA3-04M
      • SA3-06M
      • SA3-014M
      • SA3-022M
      • EA3-022M
    • Shutter Actuators
      • JA3-014M
    • Dimming Actuators
      • DA3-22M
      • DA3-66M
      • DA3-03M/RGBW
    • Input Units
      • IM3-40B, IM3-80B
      • IM3-140M
      • TI3-40B
      • TI3-60M
    • Combined Units
      • FA3-612M
      • RC3-610M/DALI
      • IOU3 -108M
    • Controllers
      • GSB3-XX
      • GSB3 XX/SX
      • MSB3 XX/XX
      • WSB3-20, WSB3-20H
      • WSB3-40, WSB3-40H
      • WMR3-21
      • GCR3-30
    • Thermo-regulators
      • IDRT3-1
    • Integration
      • iNELS Bridge
  • How to get started
    • First run of Central unit
    • Firmware update of Units
    • Reset Central Unit CU3-XX
    • Exports for iNELS Cloud and APP
    • Controlling DALI Ballasts in iNELS Systems
    • What steps should be taken when a unit shows as disconnected?
    • iDM Bus Analysis and Troubleshooting Software
  • iNELS Design Manager: iDM3
    • Software Download
    • Troubleshooting Disconnected Units in iDM3 Software
    • Understanding Bits and Integers in iNELS Design Manager for Building Automation
    • Regulators
      • Two-point regulator
      • Three-point regulator
      • Fan-coil regulators
      • Cooling regulator
      • Heating regulator
    • Introduction to the iDM (iNELS Design Manager)
      • Main Screen Components
    • True state and Long State button
  • 3rd Party Integration
    • How to Integrate iNELS BUS with 3rd Party world.
    • MQTT payload description of iNELS BUS devices
    • MQTT Payload Manual for Bits and Integers
    • HVAC Control: How to Control HVAC from iNELS system using Tasmota IR Controller
    • How to Integrate iNELS BUS with Home Assistant
    • Integration : iNELS System with NETx BMS via MQTT Protocol
    • Integrating iNELS with Modbus, BACnet, ASCII, Z-Wave, etc.
  • Inspinia
    • Inspinia Touch Series
    • A-iBUS Slave Addon Module Manual for Inspinia Screens (INS4SQ, INS8SQ, INS10SQ)
    • iNELS BUS Add-On Module Manual for Inspinia Touch Panels
    • Adding iNELS Units to Inspinia via MQTT
    • SKY PLATFORM
Powered by GitBook
On this page
  1. iNELS Design Manager: iDM3

Regulators

User data

User data encompasses a range of components and programs within iDM or the mobile application that users can modify. Changes made to user data do not necessitate saving the project again to the central unit, allowing adjustments while the CU is still operational. The following components or programs interact with user data:

  • Two-state programs: Configured as outlined in Two state programs

  • Heating/Cooling time plans: Configured according to Heating/Cooling areas and Time plan.

  • Regulator and controller online parameters: Configured per Heating/cooling area definition and subsequent chapters.

PreviousUnderstanding Bits and Integers in iNELS Design Manager for Building AutomationNextTwo-point regulator

Last updated 11 months ago