iNELS Wiki
iNELS Bus
iNELS Bus
  • Introduction
    • What is iNELS Bus
    • Key features of iNELS Bus
    • iNELS BUS Technology.
    • iNELS Bus communication
  • Technical manual: Products
    • Detectors
      • DLS3-1
      • MCD3-01
      • PMS3-01
    • Converters
      • ADC3-60M
      • DAC3-04M
      • IBWL3-20B-SL
    • Switching Actuators
      • SA3-01B/SA3-02B
      • SA3-04M
      • SA3-06M
      • SA3-014M
      • SA3-022M
      • EA3-022M
    • Shutter Actuators
      • JA3-014M
    • Dimming Actuators
      • DA3-22M
      • DA3-66M
      • DA3-03M/RGBW
    • Input Units
      • IM3-40B, IM3-80B
      • IM3-140M
      • TI3-40B
      • TI3-60M
    • Combined Units
      • FA3-612M
      • RC3-610M/DALI
      • IOU3 -108M
    • Controllers
      • GSB3-XX
      • GSB3 XX/SX
      • MSB3 XX/XX
      • WSB3-20, WSB3-20H
      • WSB3-40, WSB3-40H
      • WMR3-21
      • GCR3-30
    • Thermo-regulators
      • IDRT3-1
    • Integration
      • iNELS Bridge
  • How to get started
    • First run of Central unit
    • Firmware update of Units
    • Reset Central Unit CU3-XX
    • Exports for iNELS Cloud and APP
    • Controlling DALI Ballasts in iNELS Systems
    • What steps should be taken when a unit shows as disconnected?
    • iDM Bus Analysis and Troubleshooting Software
  • iNELS Design Manager: iDM3
    • Software Download
    • Troubleshooting Disconnected Units in iDM3 Software
    • Understanding Bits and Integers in iNELS Design Manager for Building Automation
    • Regulators
      • Two-point regulator
      • Three-point regulator
      • Fan-coil regulators
      • Cooling regulator
      • Heating regulator
    • Introduction to the iDM (iNELS Design Manager)
      • Main Screen Components
    • True state and Long State button
  • 3rd Party Integration
    • How to Integrate iNELS BUS with 3rd Party world.
    • MQTT payload description of iNELS BUS devices
    • MQTT Payload Manual for Bits and Integers
    • HVAC Control: How to Control HVAC from iNELS system using Tasmota IR Controller
    • How to Integrate iNELS BUS with Home Assistant
    • Integration : iNELS System with NETx BMS via MQTT Protocol
    • Integrating iNELS with Modbus, BACnet, ASCII, Z-Wave, etc.
  • Inspinia
    • Inspinia Touch Series
    • A-iBUS Slave Addon Module Manual for Inspinia Screens (INS4SQ, INS8SQ, INS10SQ)
    • iNELS BUS Add-On Module Manual for Inspinia Touch Panels
    • Adding iNELS Units to Inspinia via MQTT
    • SKY PLATFORM
Powered by GitBook
On this page
  1. Introduction

What is iNELS Bus

PreviousIntroductionNextKey features of iNELS Bus

Last updated 9 months ago

iNELS Bus is a communication protocol and system developed by ELKO EP, a leading manufacturer of smart home and building automation solutions. iNELS Bus is designed to enable seamless communication between various devices and subsystems within a building, such as lighting, heating, ventilation, security, and more.

The iNELS Bus system utilizes a 2 wired bus network infrastructure to connect and control different components and devices throughout the building. It employs a decentralized architecture, where each subsystem on the bus has its own intelligence and can communicate with others directly.

The iNELS Bus protocol uses a combination of wired connections, such as RS-485, Dali, Modbus, and wireless technologies like RF (radio frequency) to establish communication links. iNELS bus also uses network protocols such as IP and MQTT to communicate with 3rd party world. This allows for flexibility in the system design, supporting both new installations and retrofitting into existing buildings.