iNELS Wiki
iNELS Bus
iNELS Bus
  • Introduction
    • What is iNELS Bus
    • Key features of iNELS Bus
    • iNELS BUS Technology.
    • iNELS Bus communication
  • Technical manual: Products
    • Detectors
      • DLS3-1
      • MCD3-01
      • PMS3-01
    • Converters
      • ADC3-60M
      • DAC3-04M
      • IBWL3-20B-SL
    • Switching Actuators
      • SA3-01B/SA3-02B
      • SA3-04M
      • SA3-06M
      • SA3-014M
      • SA3-022M
      • EA3-022M
    • Shutter Actuators
      • JA3-014M
    • Dimming Actuators
      • DA3-22M
      • DA3-66M
      • DA3-03M/RGBW
    • Input Units
      • IM3-40B, IM3-80B
      • IM3-140M
      • TI3-40B
      • TI3-60M
    • Combined Units
      • FA3-612M
      • RC3-610M/DALI
      • IOU3 -108M
    • Controllers
      • GSB3-XX
      • GSB3 XX/SX
      • MSB3 XX/XX
      • WSB3-20, WSB3-20H
      • WSB3-40, WSB3-40H
      • WMR3-21
      • GCR3-30
    • Thermo-regulators
      • IDRT3-1
    • Integration
      • iNELS Bridge
  • How to get started
    • First run of Central unit
    • Firmware update of Units
    • Reset Central Unit CU3-XX
    • Exports for iNELS Cloud and APP
    • Controlling DALI Ballasts in iNELS Systems
    • What steps should be taken when a unit shows as disconnected?
    • iDM Bus Analysis and Troubleshooting Software
  • iNELS Design Manager: iDM3
    • Software Download
    • Troubleshooting Disconnected Units in iDM3 Software
    • Understanding Bits and Integers in iNELS Design Manager for Building Automation
    • Regulators
      • Two-point regulator
      • Three-point regulator
      • Fan-coil regulators
      • Cooling regulator
      • Heating regulator
    • Introduction to the iDM (iNELS Design Manager)
      • Main Screen Components
    • True state and Long State button
  • 3rd Party Integration
    • How to Integrate iNELS BUS with 3rd Party world.
    • MQTT payload description of iNELS BUS devices
    • MQTT Payload Manual for Bits and Integers
    • HVAC Control: How to Control HVAC from iNELS system using Tasmota IR Controller
    • How to Integrate iNELS BUS with Home Assistant
    • Integration : iNELS System with NETx BMS via MQTT Protocol
    • Integrating iNELS with Modbus, BACnet, ASCII, Z-Wave, etc.
  • Inspinia
    • Inspinia Touch Series
    • A-iBUS Slave Addon Module Manual for Inspinia Screens (INS4SQ, INS8SQ, INS10SQ)
    • iNELS BUS Add-On Module Manual for Inspinia Touch Panels
    • Adding iNELS Units to Inspinia via MQTT
    • SKY PLATFORM
Powered by GitBook
On this page
  1. Technical manual: Products

Shutter Actuators

PreviousEA3-022MNextJA3-014M

Last updated 1 year ago

JA3-014M