First Start

  1. Connect eLAN-RF-204 to power via USB-C.

  2. Wait until the white LED lights up – device is in AP mode.

  3. On your phone or PC, search for WiFi network eLAN-204_SN and connect (password elkoep_204).

  4. Open a web browser and go to http://192.168.1.1.

  5. In the interface, connect the device to your home WiFi network (Service > WIFI Client tab).

  6. After successful connection, LED changes to blue or green.

  7. You can then configure the device and add RF units as neede

PreviousService

Last updated