User Manual – eLAN-RF-204
This is your starting point to explore everything you need to know about eLAN-RF-204
Basic Information
Power Supply:
Powered via USB-C connector.
Network Connection:
eLAN-RF-204 has a WiFi interface (2.4 GHz).
Maximum number of connected RF devices is 70.
For the initial connection, you need to connect to the access point (AP) created by the device in setup mode.
AP name: eLAN-204_SN
AP password: elkoep_204
Default IP address of the device in AP mode: 192.168.1.1
After connecting to the AP, open the web interface in a browser at http://192.168.1.1 – no password is required for access.
Reset Button:
Short press: device restart.
Press 3–7 seconds: green blinking – toggle WiFi ON/OFF.
Press 7–11 seconds: blue blinking – reset AP name and password.
Press 12–20 seconds: red blinking – factory reset.
Press longer than 20 seconds: no reaction (protection against accidental reset).
LED Status Indication:
White: device in AP mode (WiFi client inactive, access only via AP).
Blue: device connected to local WiFi network.
Green: device connected to cloud.
Yellow: device connected to MQTT.
Turquoise (Azure): device connected to both cloud and MQTT.
Red: error state.
Last updated