iNELS BUS Add-On Module Manual for Inspinia Touch Panels
Describes how to use iNELS addon module in Inspinia touch units
Overview
Enhance the functionality of EST touch panels (EST4, EST8, or EST10) with the iNELS Add-On Module. This module allows you to connect iNELS bus devices to control HVAC systems, lighting systems, and other wired and wireless protocols via EST touch panels.
System Architecture
Inspinia Touch Units: EST4, EST8, or EST10
iNELS Add-On Module: Connects to the EST touch panels
iNELS Power Supply with Bus Separator
iNELS System Units: Controllers, actuators, dimmers
Wiring
Connect the BUS Module: Attach the BUS module to the add-on port of the EST touch panels.
Connect the iNELS Bus Line: Connect the iNELS bus line to the EST terminal. The EST will function as the iNELS Central Unit.
Programming
Programming is done through the Sky platform:
Add iNELS Bus Device: Navigate to the right corner of the project plane and add the iNELS bus device.
Add iNELS System Units: Click the + icon to add the iNELS system units and enter the hexadecimal address of each unit.
Design and Logic Creation: Drag the added device to the project design plane and create logic with the UI object or other devices available in the Sky platform.
Supported iNELS Units in Skyplatform
| Sl No | Model of Device |
|---|---|
1 | MCD3-1 |
2 | PMS3-1 |
3 | SA3-04M |
4 | SA3-06M |
5 | SA3-014M |
6 | SA3-022M |
7 | EA3-022M |
8 | JA3-014M |
9 | JA3-018M |
10 | DA3-22M |
11 | DA3-66M |
12 | IM3-40B |
13 | IM3-140M |
14 | RC3-610M/DAL |
15 | IOU3-108M |
16 | WSB3-20 |
17 | WSB3-40 |
18 | GSB3-40-V2 |
19 | GSB3-40/S-V2 |
20 | GSB3-60-V2 |
21 | GSB3-60/S-V2 |
22 | GSB3-90-V2 |
23 | GSB3-90/S-V2 |
24 | GRT3-50 |
For further details on the programming, refer to the Sky platform documentation.
For more information, visit our Inspinia product page.
Contact Us: For any queries or support, please contact our technical team.
Last updated
