> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/intercom/intercom-devices/indoor-monitors/vim-l107/mounting-and-installation.md).

# Mounting and Installation

## Video Tutorial

{% embed url="<https://www.youtube.com/watch?t=13s&v=Fo7XTc1tSfg>" %}

***

## Written instructions

{% hint style="info" %}
Tips: The camera should be 1450\~1550mm above ground.
{% endhint %}

<figure><img src="/files/zMWgJR5MfaytII10fgUT" alt=""><figcaption></figcaption></figure>

### Surface Mounting

<figure><img src="/files/81gdjeINcmW68ocCbJaP" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th valign="top"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top">Product size:</td><td valign="top">195 × 130 × 14.5 mm</td></tr></tbody></table>

### &#x20;Desktop Mounting

\
Assemble the hook on two sides of the stand into the groove on the rear cover.

<figure><img src="/files/u0TRzJS4TAceqLHviMol" alt=""><figcaption></figcaption></figure>

Align the edge of the silica gel pad with the lower edge of the casing and paste the pad.

<div align="center"><figure><img src="/files/trv3EXA7g5w27xWPRlMF" alt="" width="423"><figcaption></figcaption></figure></div>

<figure><img src="/files/4JXW1QGgwTOyBfj5wKL6" alt="" width="410"><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th valign="top"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top">Product size:</td><td valign="top">195 × 130 × 14.5 mm</td></tr></tbody></table>

<br>

&#x20;