> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/intercom/intercom-devices/indoor-monitors/vim-l107/device-setup-initial-configuration/basic-mode.md).

# Basic Mode

## Basic Mode

<figure><img src="/files/OGTfUnwFDP12X0b9Tgbd" alt=""><figcaption></figcaption></figure>

### Display

<figure><img src="/files/5IqhrkUyqbnaLhlRkIyG" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="127.20001220703125"></th><th></th></tr></thead><tbody><tr><td>Display</td><td></td></tr><tr><td>Brightness:</td><td>Screen brightness adjustment;</td></tr><tr><td>Sleep Time:</td><td>Screen sleep time (15s, 30s, 1min, 2mins, 5mins, 20mins, 30mins);</td></tr><tr><td>Screen Lock:</td><td>The screen will be locked after screen off timeout (Unlock password is security password. The default password is 1234);</td></tr></tbody></table>

### Intercom

<figure><img src="/files/vOEtAjrC41x7ntQZUnR6" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="217.5999755859375"></th><th></th></tr></thead><tbody><tr><td>Intercom</td><td></td></tr><tr><td>System Vol:</td><td>Volume of System can be set from 1 to 6. Volume 6 is the maximum volume (Key tone);</td></tr><tr><td>Intercom Vol:</td><td>Volume of Intercom can be set from 1 to 6. Volume 6 is the maximum volume (Call volume);</td></tr><tr><td>Ringtone:</td><td>The ringing sound (Ringtone 01-04);</td></tr><tr><td>Key Tone:</td><td>The keytone (Enable or disable);</td></tr><tr><td>Call From Monitor:</td><td>Enable to receive calls from other indoor monitors;</td></tr><tr><td>Auto Answer:</td><td>Pick up automatically when receiving a call;</td></tr><tr><td>Hang Up After Unlocking:</td><td>Hang up automatically after unlocking doors.</td></tr></tbody></table>

### &#x20;Date & Time

<figure><img src="/files/yvpzzO7fnYMXn2w92ZhW" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="140.79998779296875"></th><th></th></tr></thead><tbody><tr><td>Date &#x26; Time</td><td></td></tr><tr><td>Auto:</td><td>Enable to synchronize computer time;</td></tr><tr><td>Date&#x26;Time:</td><td>Date and time can be set manually;</td></tr><tr><td>Time Zone:</td><td>A region that observes a uniform standard time;</td></tr><tr><td>12H/24H:</td><td>Select 12H or 24H format to display on the device;</td></tr><tr><td>Date Format:</td><td>3 time formats supported (YYYY-MM-DD, DD-MM-YYYY, MM-DD-YYYY);</td></tr><tr><td>NTP:</td><td>Network Time Protocol (NTP) is a protocol used to synchronize NTP time;</td></tr></tbody></table>

### Language

<figure><img src="/files/PPNk5rYVtMGj2CSnb9zH" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="120"></th><th></th></tr></thead><tbody><tr><td>Language</td><td></td></tr><tr><td>Language:</td><td><p>13 languages supported;</p><p>Custom language can be added vie web UI, using predefined template</p></td></tr></tbody></table>

### &#x20; WiFi

<figure><img src="/files/iSU6ycHl0AMggdP1fugC" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="100.79998779296875"></th><th></th></tr></thead><tbody><tr><td>Wifi</td><td></td></tr><tr><td>WLAN:</td><td>Enable to use WiFi;</td></tr><tr><td>SSID:</td><td>Select WiFi to connect; <em>(Password must be defined to connect)</em></td></tr><tr><td>Status:</td><td>The status of WiFi.</td></tr></tbody></table>

### DND

<figure><img src="/files/imQTNQMIImz2YJvvbeTI" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="124.800048828125"></th><th></th></tr></thead><tbody><tr><td>DND</td><td></td></tr><tr><td>Whole Day:</td><td>When is enabled, it will reject calls for the whole day.</td></tr><tr><td>Duration:</td><td>When is enabled, it will reject calls during this time.</td></tr><tr><td>Start Time:</td><td>Configures start time for duration period;</td></tr><tr><td>End Time:</td><td>Configures end time for duration period;</td></tr></tbody></table>

### Doors

You need to tap Search icon to find Door Stations to Indoor Monitor and tap Save to save before monitoring. Tap Funnel icon to pin the selected device to the top. Tap Pen icon to edit devices name.

<figure><img src="/files/wZaSjmwwUOoAILvayUEe" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/HfK5sLprRca0LNfiTeYq" alt=""><figcaption></figcaption></figure>

### Reboot

You can tap to select the option to reboot indoor monitor and confirm it by tapping on “OK”.

<figure><img src="/files/gj3NFCJyqteeOmCtnuKP" alt=""><figcaption></figcaption></figure>

### Version

<figure><img src="/files/30est6aMOT7yFCJ4orOv" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="165.60003662109375"></th><th></th></tr></thead><tbody><tr><td>Version</td><td></td></tr><tr><td>Firmware Version:</td><td>Firmware version of the device;</td></tr><tr><td>IP:</td><td>Current IP address of the device;</td></tr><tr><td>WiFi IP:</td><td>Current WiFi IP address of the device;</td></tr><tr><td>MAC:</td><td>MAC address of the device;</td></tr><tr><td>WiFi MAC:</td><td>WiFi MAC address of the device;</td></tr><tr><td>Register to Cloud:</td><td>Status of device registration to the Cloud Platform;</td></tr><tr><td>Account:</td><td>Shows the SIP account registration status of the device;</td></tr></tbody></table>

&#x20;

<br>

&#x20;


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.inels.com/intercom/intercom-devices/indoor-monitors/vim-l107/device-setup-initial-configuration/basic-mode.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.