Overview
Device Front/Rear Panel Description
The image shows the labeled components and functional elements of the intercom
Description:
LCD Display
Microphone
Speaker
LAN RJ45 (PoE)
TF Card
Connectors
Product feature
Android 10 System
Powered by PoE or power adapter (DC12V/2A)
Support SIP 2.0 protocol, easy integration with other SIP devices
Compatible with 3rd party application
Support monitoring 16 IP cameras
Technical Parameters
System: Android 10
RAM / ROM : 1 / 8 GB
Front Panel: Plastic
Power Supply: PoE (802.3af) or DC 12V/2A
Standby Power: 3 W
Rated Power: 10 W
Wi-Fi: IEEE802.11 b/g/n,@2.4GHz (Optional)
Ethernet Port: 1 x RJ45, 10/100 Mbps adaptive
Resolution: 1024 x 600
Working Temperature: -10℃ to +55℃
Storage Temperature: -40℃ to +70℃
Working Humidity: 10% to 90% (non-condensing)
Device Wiring
Network (PoE)
Standard RJ45 interface is used to be connected to the Master Station, Indoor Monitor and/or other network equipment. PSE shall comply with IEEE 802.3af (PoE) and its output power not less than 15.4W and its output voltage is not less than 50V.
Power
The power interface of Indoor Monitor connects to 12V DC power. Enable to connect equipment with RS485 interface. RS485 interface can output 12V/100mA power supply. If RS485 equipment to be connected doesn't require the power supply, there is no need to connect to +12V.
Warning!
1. When connecting to an inductive load device such as a relay or electromagnetic lock, you are recommended to use a diode 1A/400V (included in the accessories) in anti-parallel with the load device to absorb inductive load voltage peaks. The intercom will be better protected in this way.
2. The load current of the relay cannot be greater than 2A. See attached picture for more details.
Siren/Alarm
Interface of alarm zones connects with normally-open or normally-closed switch. When the alarm zone is triggered, it will output 12V/100mA power.
Last updated