> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/intercom/intercom-devices/indoor-monitors/vim-a107/mounting-and-installation.md).

# Mounting and Installation

{% hint style="info" %}
The camera should be 1450\~1550mm above ground.

The camera at this height can capture human face perfectly.
{% endhint %}

<figure><img src="/files/Lg3svfW0jLTy9n2lNln7" alt=""><figcaption></figcaption></figure>

### Surface Mounting

<figure><img src="/files/HfSSjLAD63UOUmFihWYG" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th valign="top"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top">Product size:</td><td valign="top">189.5 × 132 × 15 mm</td></tr></tbody></table>

### &#x20;Desktop Mounting

Assemble the hook on two sides of the stand into the groove on the rear cover.

<figure><img src="/files/Pvwz1zjy824wPPmFJduc" alt=""><figcaption></figcaption></figure>

Align the edge of the silica gel pad with the lower edge of the casing and paste the pad.

<div align="center"><figure><img src="/files/2BYuMcxaIzi4dxScI0Dg" alt="" width="423"><figcaption></figcaption></figure></div>

<div align="center"><figure><img src="/files/UfutKyffsWlLI0ZSlVws" alt="" width="410"><figcaption></figcaption></figure></div>

<table data-header-hidden><thead><tr><th valign="top"></th><th valign="top"></th></tr></thead><tbody><tr><td valign="top">Product size:</td><td valign="top">189.5 × 132 × 15 mm</td></tr></tbody></table>