> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/intercom/intercom-devices/indoor-monitors/vim-a107/device-operation/additional-features.md).

# Additional Features

### Quad Splitter

Tap on Quad Splitter icon on Indoor Monitor screen to add or monitor IPCs. Tap any screen of IPC to make it full screen, if available or tap the “+” to add new camera stream. User can also add more cameras by tapping the icon on the right upper corner. Tap left or right arrow to switch between 4 pages. Up to 16 IPC can be added.

<figure><img src="/files/pa5ymsDC3pyXdLLQHokV" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/dQvgVk9DVOoSYSq09FtB" alt=""><figcaption></figcaption></figure>

Tapping the Search icon connected IP cameras with ONVIF support will be detected. User can add selected camera stream to the available list by tapping “+” icon and entering camera credentials. RTSP stream must be defined by direct stream URL (*example: rtsp\://admin:123456\@10.11.12.100:8554/ch01*).

<figure><img src="/files/S720Q70MF7yNFMI58e2m" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/pXMFpApAkhRBFslxDLpe" alt=""><figcaption></figcaption></figure>

### Call Logs

Tap Call Logs option to view the list of calls from the newest to latest – max 60. User can clean them One-by-one or call back to the selected on. By choosing Clear all functions, all logs will be deleted.<br>

<figure><img src="/files/mXMZTyIEslqzTwWeA8HO" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/nyRwqpUljd3Zb4y4e2kI" alt=""><figcaption></figcaption></figure>

### Phonebook

Slide from left to right near the left edge of the screen to show up phonebook page.

<figure><img src="/files/grSySM4t7TbnsqPoQY0z" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/15LifPwQrO6IqJyEkh57" alt=""><figcaption></figcaption></figure>

Or go to Call > Phonebook. Select the name on the phonebook and press dial button to call. Add new contact by tapping “+” icon and defining the Name, Type and Number.

<figure><img src="/files/fEAXZJZV2OWFx2pp827O" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/J77yrqD0DgOnu5DBgU7h" alt=""><figcaption></figcaption></figure>

### DND

Tap DND icon to enable do not disturb function. No calls can call in.<br>

<figure><img src="/files/FsFVMM2M7yBpY7XgKcmY" alt=""><figcaption></figcaption></figure>

### &#x20;QR Code

Tap the QR Code and scan by iNELS App to connect to the Cloud Platform. Only when the license is filled in on Internet – connected Indoor Monitor, will QR code be available.

<figure><img src="/files/2Lyxbui6RhDMiAoXR3AW" alt=""><figcaption></figcaption></figure>

### Security

Security is for connected sensors. To enter Zone or Scene use default password is 1234.

<figure><img src="/files/NU1XWJfnyYoYjIlXfii5" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/vltkMpzvUvbNJo13NTbC" alt=""><figcaption></figcaption></figure>

### ON/OFF

<figure><img src="/files/NUuD7lFhh4iekK8NPmQG" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="116.4000244140625"></th><th></th></tr></thead><tbody><tr><td>On / Off</td><td></td></tr><tr><td>ON:</td><td>Tap Out, Home, or Sleep icon to activate the scene for alarm sensors, the icon on the main interface will light up with a beep sound;</td></tr><tr><td>OFF:</td><td>Tap OFF to disable scene;</td></tr></tbody></table>

### Zone

<figure><img src="/files/Qq7FvXXWcXlKEWf8lOaS" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/JVL1j512pZrpBj6HZGGs" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="138"></th><th></th></tr></thead><tbody><tr><td>Zone</td><td></td></tr><tr><td>Type:</td><td><p>·  Normal: When users enable an alarm scene on the On/Off page, Normal type alarm zone will be activated after activation time.</p><p>o   100 seconds is the default activation time, it means the alarm will be activated after 100 seconds.</p><p>o   After 100s, once sensor is triggered, Indoor Monitor will send this alarm to Master Station.</p><p>o   But sometimes users don't want to send the alarm to Master Station (maybe alarm by mistake), users can set the Delay time, so they can cancel the alarm in the Indoor Monitor during this Delay time (PIR, Door, Window);</p><p>·  Emergency: once Panic button is triggered, Indoor Monitor will not initiate an alarm and only Master Station will receive alarms secretly; 24 hours standby even if the security is off (Panic, Pull Cord);</p><p>·  24 Hour: Indoor Monitor will initiate an alarm, and Master Station will also receive alarms. 24 hours standby even if the security is off (Smoke, Gas, Flood);</p></td></tr><tr><td>Mode:</td><td><p>·  3C: for the sensor with 2.2KΩ resistance; Regardless of the connection to NC or NO, the alarm can be triggered normally;</p><p>·  NO: normally open;</p><p>·  NC: normally closed;</p><p>·  BELL: in BELL mode, Master Station will not receive any alarm. Indoor Monitor is regarded as a doorbell receiver;</p></td></tr><tr><td>Delay:</td><td>Once sensor is triggered, Indoor Monitor will send this alarm to Master Station, but users can terminate the alarm sending to Master Station during the delayed time set here. Delay setting is only effective for Normal type (0s, 5s, 15s, 20s, 25s, 40s, 60s);</td></tr><tr><td>Sensor:</td><td>Sensor types (Smoke, Gas, PIR, Door, Window, Panic, Flood, Pull Cord, Bed Mat);</td></tr></tbody></table>

### Scene

<figure><img src="/files/Hpv8NRxEA66XaBcDoWou" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="160.4000244140625"></th><th></th></tr></thead><tbody><tr><td>Scene</td><td></td></tr><tr><td>Activation Time:</td><td>Only after activation time, will scene be activated. Activation time is only effective for Normal type (NONE, 30s, 40s, 60s, 100s, and 300s);</td></tr><tr><td>Mode:</td><td>Tick to link sensors to Out, Home, or Sleep scene;</td></tr></tbody></table>

### Setup

<figure><img src="/files/mS6fFWrm2Ug47ZQILFl7" alt=""><figcaption></figcaption></figure>

<table data-header-hidden><thead><tr><th width="186"></th><th></th></tr></thead><tbody><tr><td>Setup</td><td></td></tr><tr><td>Old:</td><td>Current security password of the Device (Default 123456);</td></tr><tr><td>New:</td><td>New security password of the Device;</td></tr><tr><td>Confirm:</td><td>Confirm security password of the Device;</td></tr></tbody></table>

### Concierge

Tap the Call icon and press the Concierge icon on the next screen, to call Master Station one by one.

<figure><img src="/files/7XS9xu5mjR4GbsgMBTtS" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/Z6PFhsknWWLrixniC6bN" alt=""><figcaption></figcaption></figure>

Tap the Concierge icon to call predefined Group of Master stations, one by one

<figure><img src="/files/Zw9CcVj7ke7ZdiMLLXOZ" alt=""><figcaption></figcaption></figure>

### &#x20;Elevator

<figure><img src="/files/Z4zbrwuYJug8URDaEkXn" alt=""><figcaption></figcaption></figure>

Press the Elevator icon to control elevator (Elevator Control Module is needed).

### SOS

Tap the SOS icon on the device LCD to trigger the alarm. If pressed, an SOS alarm will be sent to the master station, if connected. Users can set the trigger time length on the web UI. If the time is set to 3s, user needs to press the SOS icon for 3s to send out SOS, to avoid alarm caused by incorrect operation.

<figure><img src="/files/J6g9UyV55bqJpTbOg3JJ" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/4RUNML3ot8nLFrPTl7h6" alt=""><figcaption></figcaption></figure>

### Browser

Tap the Browser icon to open browser start page. User can predefine default browser and page to be open in web UI.

<figure><img src="/files/U87b2SS9Cvyihl1KWgqA" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/3ZmpY04osktpvExpl6HN" alt=""><figcaption></figcaption></figure>

### Local Relay

Tapping the Local relay icon, the predefine action will be triggered (please refer to web UI action definition).

<figure><img src="/files/XtKTHwdFYli8jyjXC9Iv" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/J7datiV5s5yC9KBzylgB" alt=""><figcaption></figcaption></figure>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.inels.com/intercom/intercom-devices/indoor-monitors/vim-a107/device-operation/additional-features.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.