| Product | |
| Model: | Model of the device; |
| Firmware Version: | Firmware version of the device; |
| MAC Address: | MAC address of the device; |
| Framework: | Framework of the device; |
| UI: | UI of the device; |
| MCU: | MCU of the device; |
| Network | |
| DHCP: | Status of DHCP; |
| IP Address: | Current IP address of the device; |
| Mask: | Subnet mask of the device; |
| Gateway: | Gateway of the device; |
| DNS: | Domain Name Server of the device; |
| Device Manager Server | |
| Register to Cloud: | Status of the device registration; |
| Node: | Connection node location; |
| SIP Account | |
| Account1-2: | SIP accounts of the device. Account1 is generally reserved for automated Cloud platform registration. Account2 can be used for 3rd party SIP server usage |
| Status: | Status of SIP registration of the device; |
| Language | |
| Web Language: | List of supported languages; |
| + Add language | Possibility to upload custom language for web interface. |
| Resolution: | 3 resolutions supported (640 × 480, 1280 × 720, 1920 × 1080); |
| Volume | |
| Intercom Volume: | Volume of Intercom can be set from 1 to 6; |
| System: | Volume of System can be set from 1 to 6; |
| Unlock Voice | |
| Unlock Voice File: | Possibility to upload custom voice – Click to Upload. When you click Delete, the uploaded voice will be deleted, and it will be restored to the factory preset voice. |
| Key Backlight | |
| Mode: | It is used to configure the brightness mode of the device's keypad light. Auto: The keypad light automatically turns on and off according to the ambient brightness; Always On: The keypad light is always on; Always Off: The keypad light is always off; Duration: The keypad light turns on at a specified time |
| Time | |
| Auto (Time): | Enable to synchronize server time; |
| Date&Time: | Date and time can be set manually, if “Auto (Time)” is disabled; |
| NTP URL: | Network Time Protocol (NTP) is a protocol used to synchronize computer time; |
| Time Zone: | A region that observes a uniform standard time; |
| Daylight-saving Time | |
| Daylight-saving Time: | Enable to set DST; |
| Start Time: | The beginning of DST; |
| End Time: | The ending of DST; |
| Offset Time: | The default value is 60 minutes; |
| Password | |
| Web Old Password: | Current administrator password of the web (Default 123456); |
| Web New Password: | New administrator password of the web; |
| Web Confirm Password: | Confirm administrator password of the web; |
| Backup&Import | |
| Backup&Restore: | Backup all setting and restore settings; |
| Upgrade: | Upgrade equipment; |
| Reset: | Reset to factory settings; |
| Reboot: | Reboot the device; |
| Debug | |
| Packet Capture: | Capturing packets can help developers reproduce positioning problems; |
| Logs: | Device logs; |
| Remote Access | |
| Allow Remote Access: | Allows device remote control via Cloud Platform |
| Device Manager Server | |
| Register to Cloud: | It is used to configure the device to register to the cloud server. ;Valid values: Enable/Disable |
| Node: | Shows the Cloud Platform node location, if registered |
| Device | |
| Automatic deployment: | It is used to configure whether the device is allowed to automatically connect to the cloud platform and obtain configuration. Valid values: Enable/Disable. Enabled when device registered on Cloud Platform – all below mentioned parameters are read only then |
| Site ID: | It is used to configure the device to automatically connect to the specified site of the cloud platform (max 10 characters) |
| Device Name: | It is used to configure device name (max 16 characters) |
| Building No.: | It is used to configure the building no. of the device (Range: 1-999); |
| Unit No.: | It is used to configure the unit no. of the device. Also indicates "Rise No." or "Stair No." (Range: 0-99); |
| Apartment No.: | It is used to configure the apartment no. of the device. In villa station mode, this number needs to be consistent with the apartment no. configured on the indoor monitor. After the configuration is completed, you can press the call button of the device to call the indoor monitor directly. (Range: 0-9899); |
| Device No.: | It is used to configure the device number of the device. When the devices are installed in the same location (building number and unit number are the same), the device number needs to be configured to distinguish them as different devices. 1: Indicates that the device is a host 2-9: Indicates that the device is a slave (Range: 1-9); |
| Ethernet | |
| DHCP: | It is used to configure whether the device uses DHCP to obtain an IP address. When it is turned on, IP Address, MASK, Gateway, and DNS cannot be configured. |
| IP Address: | Configure Static IP address to manually distribute network configuration parameters; |
| Mask: | Subnet mask; |
| Gateway: | A component that is part of two networks, which use different protocols: |
| DNS: | Domain Name Server of the device; |
| Account 1 | |
| Status (via cloud service): | Shows the device status registration with SIP server; |
| Account 2 | |
| SIP: | Enable to use SIP; |
| Display Name: | Display name of SIP; |
| Register Name: | Register Name of SIP; |
| Username: | Username of SIP; |
| Password: | Password of SIP; |
| SIP Server Host: | Directly fill in SIP server’s address e.g., 192.168.68.90; The default port is 5060; |
| Outbound Proxy: | Directly fill in Outbound Proxy of SIP; The default port is 5060; |
| Registration Duration: | Registration duration when the device registers with the SIP server; (sec) |
| Transport Protocol: | Transfer Protocol (UDP, TCP, TLS); |
| DNS SRV: | Enables the DNS SRV function when the device registers with the SIP server; |
| Other | |
| Video Payload: | Specifies the RTP payload type number used to identify the video codec stream during a SIP call (96 – 127) |
| Ring Group | |
| Mode: | 2 modes supported (one by one, all at once); l One by one: Make calls one after one following the ring group order. - Works only when device not allowed to register to the cloud l All at once: Make calls to all ring group destinations. |
| + Add: | Configures the number that the device wants to call, which can be configured as an IP address or a SIP number. IP address: The format is xxx.xxx.xxx.xxx SIP number: The format is xxx or xxx@xxx (x is any character of the String type) (max 7 numbers / group) |
| Call Concierge | |
| Concierge*: | Configures the device to enable the concierge function. If Disable, the concierge icon on the device LCD will not be visible, and the concierge button on the keyboard (if any) will not respond when pressed. |
| Concierge NO.*: | Configures the number that the device calls the concierge. If configured, the enter number will be displayed on the LCD. Valid values: String within 10 characters (0-9 or a-z or A-Z) |
| + Add: | Define the call Type and Destination for concierge – multi or single button on the device; l IP call: Fill in ip:IP address, e.g., sip:192.168.68.90; l SIP call: Fill in SIP Address:sip account@SIP server address:port, e.g., sip:101@192.168.68.90:5060; |
| Hang Up After Unlock | |
| Hang Up After Unlock: | Configures whether the device automatically ends the call after unlocking. |
| Timeout: | Configures the time (in seconds) when the device automatically ends the call after unlocking. (Range: 1s – 10s) |
| Settings | |
| Ring Time: | The ring will be ended automatically after a period (10s, 20s, 35s, 45s, 60s, 90s, 120s) |
| Dial Mode: | Single dial mode supported – hangs up the call when not answered; |
| Call Time: | The call will be ended automatically after a period (120s, 300s, 600s, 1200s, 1800s); |
| Call Logs | |
| Type: | Switch filter between Ongoing / Incoming call type; |
| Date&Time: | Set start and end date for filtering logs; |
| Search: | Run search based on filter definition; |
| Reset: | Resets defined filter rules; |
| Delete All: | Deletes all selected logs; |
| Export: | Export logs to csv file; |
| Relay | |
| Relay 1-2: | 2 relays supported; |
| DTMF: | Dual-tone multi-frequency signaling (Relay1: #, Relay2: 0, Relay3: *); |
| Unlock Delay: | The length of unlock delay time (1-9s); |
| Unlock Time: | The length of unlock time (1-9s); |
| Click to Unlock: | Click to trigger the relay to unlock. |
| Dry Contact Input 1-2: | · Supports 3 modes of dry contact inputs are supported (Exit Button, Door Sensor, Fire Linkage); · Select relay to trigger · Select the action (Do not call, Call to Concierge, Call to Number) - When “Call to Number” selected, Room no. (xxx) or IP address (xxx.xxx.xxx.xxx) or SIP address (sip:xxxxxx) needs to be defined |
| Open Relay via HTTP | |
| Open Relay via HTTP: | Configures whether third-party devices can use http to unlock. If enabled, third parties can use http commands to unlock. |
| Card | |
| Master Card: | Configure whether the device uses the master card function. If it is turned on, you can click Read and place the card in the device's card read area. The card will be used as the device's master card to add and delete other access cards. |
| Swipe to Arm/Disarm: | Arm / disarm the function |
| Card Reading Mode: | Configures the mode of the device to read the access card. Compatible mode: read a specific card number in the card Full Card No. mode: read all card numbers in the card. |
| Card Order: | Configures the order in which the device reads all the card numbers in the access card (Normal, Reserved) |
| Card Display Mode: | Configures the display style after the device reads all the card numbers in the access card (Decimal, Hexadecimal) |
| Card Reader Open Relay: | Configures the relay that opens after the access card is read by the device card reader (Select/Unselect – Relay1, Relay2) |
| Wiegand Settings | |
| Wiegand Transfer Mode: | Configures the device's role in the Wiegand communication as either a receiver (reading data) or a transmitter (outputting data). |
| Wiegand Input Bits: | Configures the bits of the value obtained by the device's Wiegand port from an external card reader (26, 34, 58) |
| Wiegand Input Data Order: | Configures the input sequence of the data obtained by the door station from the external card reader (Normal, Reserved) |
| Wiegand Output Bits: | Configures the bits of the value sent by the device's Wiegand interface to the external device (26, 34, 58) |
| Wiegand Output Data Order: | Configures the sequence of data that the door station sends to external devices (Normal, Reserved) |
| Wiegand Open Relay: | Configures the relay that opens after the access card is read by external Wiegand (Select/Unselect – Relay1, Relay2) |
| Web Relay Action | |
| IP Address: | Configures the IP address used by web relay |
| Username: | Configures the username used by web relay for authentication |
| Password: | Configures the password used by web relay for authentication |
| Web Relay Key: | Configures the DTMF key that triggers the web relay action. When the device receives the DTMF value from the other end during a call, it can trigger the web relay to perform the configured action. Valid values: 0-9/*/#/A/B/C/D |
| Action URL: | Configures the operation to be performed after receiving the web relay, usually an http command, for example: - http://username:password@IP/state.xml?relayState=2 |
| Web Relay Permission: | Configures the legal devices that are allowed to trigger the web relay. If it is empty, all terminals that talk to the device can trigger it. If the IP or SIP account of a specified device (xxx.xxx.xxx.xxx or xxx@xxx) is configured, can only be triggered by the specified device. |
| Person | |
| Group: | Configures different groups for personnel management |
| “+” | Configures the name of the group, and the name cannot be repeated |
| Add | |
| Status: | Configures whether to activate the access of this person. |
| Name: | Configures the name of the person (max 30 characters) |
| Card No.: | Configures the card that this person uses to unlock the door, and supports up to 3 cards |
| Number of Passes: | Configures the total number of times this person passes through all selected relays. If disabled, there is no limit on the number of passes |
| Relay: | Configures the relay that this person can open |
| Effective time: | Configures the effective time of this person. If enabled, you can configure the start, end, and day of the week within the effective time. |
| Cloud | |
| Name: | Configures the name of the person Valid values: String within 26 characters |
| Room No.: | Configures the apartment number of the person Valid values: 0-9899 |
| Card No.: | Configures the card that this person uses to unlock the door, and supports up to 3 cards Valid values: String within 256 characters |
| Unlock Logs | |
| Group: | Set Group for filtering logs; |
| Name: | Set Name for filtering logs; |
| User Type: | Multiple selection of User types for filtering logs; (None, Resident, Visitor, Property, Staff, Tenant, Custom) |
| Unlock Type: | Multiple selection of Unlock types for filtering logs; (Card, Intercom, Exit button, Web, Face, APP, Bluetooth, QR Code, Temp Key, Master Station, Landline, HTTP) |
| Unlock Time: | Set start and end date for filtering logs; |
| Search: | Run search based on filter definition; |
| Reset: | Resets defined filter rules; |
| Delete All: | Deletes all selected logs; |
| Export: | Export logs to csv file; |
| Video Stream Setting | |
| Video Stream: | Configures whether the device is enabled for video surveillance; |
| Username: | Configures the username for authentication when the device is used as video surveillance; |
| Password: | Configures the password for authentication when the device is used as video surveillance; |
| RTSP LED | |
| RTSP LED: | Configures the LED settings when the device is used as a video surveillance device. Auto: turns on and off according to changes in ambient light Always Off: The LED is always off; |
| RTSP Feed | |
| RTSP Feed: | Configures the device's RTSP Feed settings. If configured, you need to fill in the URL; Supports up to 4 IP cameras; |
| HTTP Event | |
| Enabled: | Configures whether to enable the trigger action; |
| Event: | Displays operations that support triggering actions |
| Action URL: | It is used to configure the triggered action, usually an http command, for example: - http://username:password@IP/state.xml?action=unlock; |
| Tamper | |
| Tamper Alarm: | Enable to use Tamper alarm on the back of the device; |
| Periodic Sleep | |
| Periodic Sleep: | Configure whether the device has periodic sleep function enabled. If enabled, you can configure the start, end, and day of the week within the effective time. |
| Other | |
| ONU Penetration: | Enable to prevent ONU from banning multicast; |