> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/intercom/intercom-devices/door-stations/ves-b101/mounting-and-installation.md).

# Mounting & Installation

<table data-header-hidden><thead><tr><th width="800"></th></tr></thead><tbody><tr><td><p></p><p><img src="/files/FfhRXaJQUhLem18kDcfi" alt="" data-size="original"></p><p></p><p>I.  Choose the suitable height of camera and put the label sticker on the wall. </p><p> </p><p>II.  According to the sticker, drill three 8 x 45mm for screws and one 5mm for wire outlet. </p><p> </p></td></tr><tr><td><p></p><p><img src="/files/H2N6sKfGq7dmq5LCxc7Y" alt="" data-size="original"></p><p>III.  Insert 3 screw fixing seats into the screw holes.</p><p><img src="/files/bU0uWd1QYMsxCBauE1Wv" alt="" data-size="original"></p><p><img src="/files/55PgiT32GlWPYgoDIbRR" alt="" data-size="original"></p><p></p><p>IV.  Remove the sticker after drilling. </p><p> </p><p>V.  Lock the rain hood or rear cover with 3 screws </p><p> </p><p>VI.  Let wires(included) and network cable without RJ-45 plug go through rear cover and waterproof seal plug. </p></td></tr><tr><td><p> </p><p><img src="/files/nPhtrbHGfYvc4YBnoU19" alt="" data-size="original"></p><p><img src="/files/oJ82Gr6UB2yvgR0RK3XK" alt="" data-size="original"></p><p>VII.  Connect RJ-45 Plug. </p><p> </p><p>VIII.  Plug waterproof seal plug into the cover groove at the bottom. </p><p> </p><p>IX.  Fix interface clamp to the device with 2 screws. </p></td></tr><tr><td><p> </p><p></p><p><img src="/files/kL5fJcasA1kaQvE94z2j" alt="" data-size="original"></p><p><img src="/files/AsAuzfUvqlQ0Sh00NzkN" alt="" data-size="original"></p><p><img src="/files/5zQfihkIjFbJcAWnsAd8" alt="" data-size="original"></p><p></p><p>X.  Hang up device with rear cover. </p><p> </p><p>XI.  Use wrench to lock the bottom of the device with 1 screw (different screws for rain hood and rear cover). </p></td></tr></tbody></table>

<br>

&#x20;


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.inels.com/intercom/intercom-devices/door-stations/ves-b101/mounting-and-installation.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.