eLAN-204

This is your starting point to explore everything you need to know about eLAN-RF-204- Smart Gateway

Image

The smart gateway enables control of iNELS Wireless and iNELS Home components from applications (smartphones, tablets, voice assistants) and other third-party devices using MQTT communication.
Up to 70 iNELS Wireless devices or 20 iNELS Home devices can be connected, and it processes set programs for automatic control, time scenarios, or schedules for heating control.
Thanks to two-way communication, it displays the current status of individual elements and sends push notifications about their status.
It provides a connection to the iNELS Cloud for remote control without the need for a static IP or advanced automation settings.
It can be placed anywhere on a horizontal surface, and thanks to its flat surface and removable base, it can also be mounted on a wall or ceiling.
Powered by a 5 V DC/2 A adapter, USB-C connector (included).

eLAN-RF-204 has a WiFi interface (2.4 GHz).
Maximum number of connected RF devices is 70.
For the initial connection, you need to connect to the access point (AP) created by the device in setup mode.
AP name: eLAN-204_SN
AP password: elkoep_204
Default IP address of the device in AP mode: 192.168.1.1
After connecting to the AP, open the web interface in a browser at http://192.168.1.1 – no password is required for access.

Short press: device restart.
Press 3–7 seconds: green blinking – toggle WiFi ON/OFF.
Press 7–11 seconds: blue blinking – reset AP name and password.
Press 12–20 seconds: red blinking – factory reset.
Press longer than 20 seconds: no reaction (protection against accidental reset).

Last updated 22 days ago