> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/switch-units/rfsai-xxb-sl.md).

# RFSAI-xxB-SL

Switch units with an input for external buttons — RFSAI-61B-SL, RFSAI-62B-SL, RFSAI-11B-SL, RFSAI-61BPF-SL. Wiring, programming card, pairing, clearing, specs.

{% embed url="<https://youtu.be/mCb1lu6vIIc?si=xsapnuuH_pq1pkeC>" %}

*Part 3 — Unit reference · Switch units.*

Switch units with one or two relay outputs and an input for an existing wired button or switch. Small enough to fit in an installation box — even behind an existing switch — a ceiling, or the cover of the appliance.

<table data-view="cards"><thead><tr><th></th><th></th><th data-hidden data-card-cover data-type="files"></th></tr></thead><tbody><tr><td><strong>RFSAI-61B-SL</strong></td><td>1 output, 6 functions, 25 buttons</td><td><a href="https://2503278529-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FkoLW6hWCvDgagoswDVfD%2Fuploads%2FTv4612aYXgSMa0Nw9AqS%2Frfsai-61b-sl.png?alt=media">rfsai-61b-sl.png</a></td></tr><tr><td><strong>RFSAI-62B-SL</strong></td><td>2 outputs, 6 functions, 2 × 12 buttons</td><td><a href="https://2503278529-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FkoLW6hWCvDgagoswDVfD%2Fuploads%2Ff2PHMg8dC3MOzZoQczJn%2Frfsai-62b-sl.png?alt=media">rfsai-62b-sl.png</a></td></tr><tr><td><strong>RFSAI-11B-SL</strong></td><td>1 output, ON/OFF only, 25 buttons</td><td><a href="https://2503278529-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FkoLW6hWCvDgagoswDVfD%2Fuploads%2FsJRwWzbfyO0IABBkEQwr%2Frfsai-11b-sl.png?alt=media">rfsai-11b-sl.png</a></td></tr><tr><td><strong>RFSAI-61BPF-SL</strong></td><td>1 potential-free output, 6 functions</td><td><a href="https://2503278529-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FkoLW6hWCvDgagoswDVfD%2Fuploads%2FSYeslANIM8mBteY5M7E5%2Frfsai-61bpf-sl.png?alt=media">rfsai-61bpf-sl.png</a></td></tr></tbody></table>

## At a glance

|                       | RFSAI-61B-SL        | RFSAI-62B-SL              | RFSAI-11B-SL  | RFSAI-61BPF-SL                               |
| --------------------- | ------------------- | ------------------------- | ------------- | -------------------------------------------- |
| Outputs               | 1 × switching       | 2 × switching             | 1 × switching | 1 ×, galvanically separated (potential-free) |
| Functions             | 6                   | 6 per output              | 1 (ON/OFF)    | 6                                            |
| Wireless buttons      | 25                  | 12 per output             | 25            | 25                                           |
| External button input | Programmable        | Programmable              | Fixed ON/OFF  | Programmable                                 |
| Load                  | 8 A / AC1 (2000 VA) | 8 A total, e.g. 6 A + 2 A | 8 A / AC1     | 8 A / AC1                                    |
| EAN                   | 8595188182041       | 8595188182010             | 8595188183758 | 8595188189101                                |

## Wiring

{% hint style="danger" %}
Switch the circuit off before wiring. The **external-button input is at mains potential** — wire the button as a mains device.
{% endhint %}

| No. | Terminal          | Connect                                            |
| --- | ----------------- | -------------------------------------------------- |
| 1   | LED / PROG button | — (status LED, programming and manual control)     |
| 2   | External button   | Existing wired button or switch                    |
| 3   | N                 | Neutral                                            |
| 4   | Output(s)         | Load. On the 62B-SL both outputs together max. 8 A |
| 5   | L                 | Phase                                              |

* Screwless terminals, 0.2–1.5 mm² solid or flexible.
* Mounting: installation box (also under an existing switch), ceiling, or appliance cover.
* Keep at least 1 cm from other units; never in a metal box.

Wiring diagram: see the [instruction manual (PDF)](https://www.elkoep.com/media/import/Elko/RFx/RFSAI-61B-SL/EN/Manual_RFSAI-xxB-SL.pdf), page 1.

## Programming card

|                                        | Single-channel: 61B-SL / 11B-SL / 61BPF-SL                                                                                              | Two-channel: 62B-SL                                                                                                          |
| -------------------------------------- | --------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------------- |
| Manual on/off                          | PROG < 1 s                                                                                                                              | PROG < 1 s                                                                                                                   |
| Select output                          | —                                                                                                                                       | PROG 1–3 s — LED green = output 1, red = output 2                                                                            |
| **Enter programming**                  | **PROG 2 s**                                                                                                                            | **PROG 3–5 s**                                                                                                               |
| Finish programming                     | PROG < 1 s                                                                                                                              | PROG < 1 s                                                                                                                   |
| Timing mode (5× / 6×)                  | PROG more than 5 s                                                                                                                      | PROG more than 5 s                                                                                                           |
| **Clear one button**                   | **PROG 5 s**                                                                                                                            | **PROG 8 s**                                                                                                                 |
| **Clear whole memory (factory reset)** | **PROG 8 s**                                                                                                                            | **PROG 12 s**                                                                                                                |
| Functions                              | [1×–6×](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-b-functions-by-number-of-presses.md) (11B-SL: ON/OFF only) | [1×–6×](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-b-functions-by-number-of-presses.md) per output |
| Pairs with                             | All iNELS RF Control and RF Control2 controllers and system units; RFIO2 detectors                                                      | same                                                                                                                         |

## Pair a controller button

{% stepper %}
{% step %}

### Controller into pairing mode

Hold the controller's pairing button 1 s (red LED short blink). Older controllers: [Pairing reference, section B](https://wiki.inels.com/inels-home/inels-wireless/pairing-and-configuration.md).
{% endstep %}

{% step %}

### RFSAI-62B-SL only: choose the output

Hold PROG **1–3 s** and release. The LED shows the selected output: **green = output 1, red = output 2**. Repeat to switch to the other output.
{% endstep %}

{% step %}

### Unit into programming mode

Hold PROG — **2 s** on single-channel units, **3–5 s** on the 62B-SL. The LED flashes once per second.
{% endstep %}

{% step %}

### Choose the function

Press the controller button **1–6 times, about 1 s apart** ([Appendix B](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-b-functions-by-number-of-presses.md)). The LED lights at each press. On the RFSAI-11B-SL press once — the button below gets OFF automatically.
{% endstep %}

{% step %}

### Finish

Short press PROG (< 1 s). The LED shows the memory-function setting and the unit returns to operation.
{% endstep %}
{% endstepper %}

### Delayed off / delayed on (5× / 6×)

After the 5 or 6 presses, hold PROG **more than 5 s** (LED flashes twice per second). Timing starts when you release. When the time you want has passed (2 s – 60 min), press the same controller button once to store it, then short press PROG to finish.

## Pair the external button

On the 61B-SL, 62B-SL and 61BPF-SL the wired button is paired **exactly like a wireless one**: put the unit into programming mode and press the external button the required number of times. On the RFSAI-11B-SL the external button has a fixed ON/OFF function and is not programmed.

## Memory function

Decides what the output does after a power cut.

1. Put the unit into programming mode (as above).
2. Short press PROG (< 1 s). This **reverses** the memory setting and leaves programming mode.
3. The LED shows the new setting: **3 blinks = on**, **one long light = off**.

| Setting            | After a power cut                                               |
| ------------------ | --------------------------------------------------------------- |
| On — functions 1–4 | Output returns to its last state (saved 15 s after each change) |
| On — functions 5–6 | Output goes to the state it would have at the end of the delay  |
| Off                | Output stays off                                                |

## Clear and factory reset

**One button.** Hold PROG **5 s** (62B-SL: **8 s**) — LED flashes 4× per second. Press the controller button to remove. One long flash confirms.

**Whole memory = factory reset.** Hold PROG **8 s** (62B-SL: **12 s**) — LED flashes 4× per second. All buttons are removed; the unit stays in programming mode (LED every 0.5 s, up to 4 min). Short press PROG to leave.

Clearing does not change the memory-function setting.

## Use with eLAN-204 and service tools

* The **addresses printed on the front** of the unit (one per output) are used to add it to an eLAN-204 gateway or other system units.
* The **repeater function** can be switched on with the RFAF/USB service key, a PC, or the app.

## LED reference

| LED                             | Meaning                                             |
| ------------------------------- | --------------------------------------------------- |
| Green                           | Output 1 state (single-channel units: output state) |
| Red                             | Output 2 state (62B-SL)                             |
| Flashes once per second         | Programming mode                                    |
| Lights at each controller press | Command received                                    |
| Flashes twice per second        | Timing mode                                         |
| Flashes 4× per second           | Clear mode                                          |
| Flashes every 0.5 s             | Memory cleared, waiting in programming mode         |
| 3 blinks / one long light       | Memory function on / off                            |

## Troubleshooting

| Symptom                                                        | Fix                                                                                                                    |
| -------------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------- |
| Single-channel unit flashes 4× per second when you try to pair | PROG held too long (5 s = clear). Release, wait, hold 2 s                                                              |
| 62B-SL button controls the wrong output                        | Select the output (PROG 1–3 s, green = 1, red = 2) before entering programming                                         |
| External button does nothing (11B-SL)                          | It has a fixed function — check wiring, not programming                                                                |
| Works close by, not in place                                   | Range — see [How programming works § Range](https://wiki.inels.com/inels-home/inels-wireless/how-programming-works.md) |
| Light comes on / does not come on after a power cut            | Change the memory function                                                                                             |

## Technical parameters

|                                   |                                                      |
| --------------------------------- | ---------------------------------------------------- |
| Supply                            | 230 V AC, 50–60 Hz, +10 % / −15 %                    |
| Apparent input / dissipated power | 7 VA (cos φ = 0.1) / 0.7 W                           |
| Output                            | 1 × switching (61B, 11B, 61BPF), 2 × switching (62B) |
| Rated current / switching power   | 8 A / AC1, 2000 VA / AC1                             |
| Peak current                      | 10 A / < 3 s                                         |
| Switching voltage                 | 250 V AC1                                            |
| Contact material                  | AgSnO₂ (suitable for light ballasts)                 |
| Service life                      | mechanical 1 × 10⁷, electrical (AC1) 1 × 10⁵         |
| Protocol / frequency              | RFIO2, bidirectional, 866–922 MHz                    |
| Repeater function                 | yes                                                  |
| Range                             | up to 200 m in open space                            |
| Operating temperature             | −15 to +50 °C                                        |
| Protection                        | IP40                                                 |
| Dimensions / weight               | 43 × 44 × 22 mm / 31 g (single) · 45 g (62B-SL)      |
| Standards                         | EN 60730, EN 63044, EN 300 220, EN 301 489           |

Load capacity for other load types: see the catalog *Product loadability* table (8 A AgSnO₂ contacts).

## Downloads

* [Instruction manual RFSAI-xxB-SL (PDF)](https://www.elkoep.com/media/import/Elko/RFx/RFSAI-61B-SL/EN/Manual_RFSAI-xxB-SL.pdf)
* [Datasheet (PDF)](https://www.elkoep.com/media/import/Elko/RFx/RFSAI-61B-SL/EN/Datasheet_RFSAI-61B-SL,%20RFSAI-62B-SL,%20RFSAI-11B-SL,%20RFSAI-61BPF-SL.pdf)
* Product pages: [RFSAI-61B-SL](https://www.elkoep.com/switch-unit-rfsai-61b-sl) · [RFSAI-62B-SL](https://www.elkoep.com/switching-unit-rfsai-62b-sl) · [RFSAI-11B-SL](https://www.elkoep.com/switch-unit-rfsai-11b-sl) · [RFSAI-61BPF-SL](https://www.elkoep.com/switch-unit-with-input-for-external-button-1-channel----rfsai-61bpf-sl)
