> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfda-73m-rgb.md).

# RFDA-73M/RGB

RFDA-73M/RGB, the 3-channel dimmer for 12-24 V LED strips — one RGB strip or three single-colour strips. Modes, wiring, pairing per channel, specs.

*Part 3 — Unit reference · Dimmers.*

A DIN-rail dimmer for **LED strips** on 12–24 V DC. It has three outputs and can work in two ways: as the controller of **one RGB strip** (colour and brightness), or as **three separate dimmers** for three single-colour strips. A small **MODE switch** on the front chooses the way — and, in the three-dimmer way, also chooses which of the three channels you are pairing.

![RFDA-73M/RGB — 3 channels, 12–24 V DC, 3 × 5 A, DIN rail](https://2503278529-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FkoLW6hWCvDgagoswDVfD%2Fuploads%2FCvOfoaROqLwq6NBuP1IJ%2Frfda-73m-rgb.png?alt=media)

## At a glance

|                     | RFDA-73M/RGB                                                                             |
| ------------------- | ---------------------------------------------------------------------------------------- |
| Supply              | 12–24 V DC, stabilised. Green LED shows the supply                                       |
| Outputs             | 3 channels, 3 × 5 A rated, 3 × 10 A peak                                                 |
| Loads               | LED strips 12 V or 24 V with common anode; RGB LED strips 12 V or 24 V with common anode |
| Examples            | single-colour strip 7.2 W — 3 × 8 m; RGB strip 14.4 W — 10 m (ELKO Lighting)             |
| Wireless buttons    | up to 32                                                                                 |
| Modes               | RF RGB, RF COLOR, RF WHITE, THERM 0–10 V, THERM 1–10 V                                   |
| Range in open space | up to 160 m                                                                              |
| EAN                 | 8595188146814                                                                            |

## Wiring and front panel

{% hint style="danger" %}
Switch the supply off before wiring. Use a **stabilised** 12–24 V DC supply. Never mount the unit in a metal switchboard (or a plastic one with a metal door) without the external antenna — the radio signal cannot get out.
{% endhint %}

* **Supply:** terminals Un+ and GND, 12–24 V DC.
* **Outputs:** three channels, RED, GREEN and BLUE. For an **RGB strip** connect its R, G and B wires to the three outputs; for **three single-colour strips** connect one strip to each output. The strips must have a **common anode**. The exact terminals are in the wiring diagram on page 1 of the [instruction manual](https://www.elkoep.com/media/import/Elko/RFx/RFDA-73M/EN/Manual_RFDA-73M.pdf) and in the datasheet.
* **Antenna:** the internal antenna **AN-I** is in the box (SMA connector, tighten to max. 0.56 Nm). In a metal switchboard use the external antenna **AN-E**.
* Terminals take max. 1 × 2.5 mm² or 2 × 1.5 mm² (with sleeve). The unit is IP20 from the front panel.

| Part on the front                     | What it does                                                                        |
| ------------------------------------- | ----------------------------------------------------------------------------------- |
| **Un** LED (green)                    | Supply is on                                                                        |
| **STATUS** LED (red)                  | State of the unit — programming, memory function                                    |
| **PROG** button                       | Manual control (< 1 s) and programming                                              |
| **MODE** switch                       | Chooses the mode (turn it with a screwdriver)                                       |
| **RED / GREEN / BLUE** potentiometers | Manual colour for the MASTER button in RF COLOR mode                                |
| **FREQ** potentiometer                | Frequency of the output PWM — set it for the best-looking dimming                   |
| Inputs 0–10 V / 1–10 V                | Control of the colours and of the overall brightness from an analogue signal        |
| +10 V auxiliary output                | Max. 10 mA                                                                          |
| RF addresses 1, 2, 3 (printed)        | Used to program and control the unit from system units; address **1 is underlined** |

## Which mode?

| Mode                            | What you get                                                                                                 | Can be controlled by                                                                      |
| ------------------------------- | ------------------------------------------------------------------------------------------------------------ | ----------------------------------------------------------------------------------------- |
| **RF RGB**                      | Colour and brightness of one RGB strip. The colours of the buttons are **fixed**                             | RFWB-40, RF KEY, RFIM-40; system units RF Touch, RF Pilot, eLAN-RF-003 and eLAN-RF-Wi-003 |
| **RF COLOR**                    | Colour and brightness of one RGB strip. You **choose** the colour of each button                             | the same as RF RGB                                                                        |
| **RF WHITE**                    | Three independent dimmers for three single-colour strips, each with its own address (1, 2, 3)                | RFWB-20, RFWB-40, RF KEY, RFIM-20, RFIM-40; the same system units                         |
| **THERM 0–10 V / THERM 1–10 V** | Control by an analogue 0–10 V or 1–10 V signal, for example from the iNELS BUS system (DAC3-04M or DAC3-04B) | analogue inputs; see the manual                                                           |

## Programming card

|                                 | RFDA-73M/RGB                                                                                                                                                       |
| ------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
| Manual on/off                   | PROG < 1 s                                                                                                                                                         |
| **Enter programming**           | **Hold PROG until the LED flashes once per second**                                                                                                                |
| Finish programming              | PROG < 1 s (in RF RGB / RF COLOR the LED then goes out)                                                                                                            |
| Timing mode (5× / 6×, RF WHITE) | PROG more than 5 s — LED flashes twice per second                                                                                                                  |
| **Clear one button**            | **PROG 5 s** — LED flashes 4× per second, then press the controller button                                                                                         |
| **Clear whole memory**          | **PROG 8 s** — LED flashes 4× per second                                                                                                                           |
| Mode                            | MODE switch on the front, set **before** you enter programming                                                                                                     |
| Functions                       | RF RGB / RF COLOR: described below. RF WHITE: [1× to 8×](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-b-functions-by-number-of-presses.md) |
| Pairs with                      | See the table above                                                                                                                                                |

{% hint style="info" %}
Hold PROG until the LED starts flashing once per second. Do not hold for 5 s or more, because that starts clearing. See also [Appendix A](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-a-prog-button-times.md).
{% endhint %}

## Pair for one RGB strip (RF RGB and RF COLOR)

Use a controller with four buttons (RFWB-40, RF KEY or RFIM-40). The four buttons are **1 = red, 2 = green, 3 = blue and 4 = MASTER**.

{% stepper %}
{% step %}

### Set the mode

With a screwdriver set the MODE switch to **RF RGB** (fixed colours) or **RF COLOR** (colours you choose).
{% endstep %}

{% step %}

### Controller into pairing mode

Hold the controller's pairing button 1 s (red LED short blink). Older controllers: [Pairing reference, section B](https://wiki.inels.com/inels-home/inels-wireless/pairing-and-configuration.md).
{% endstep %}

{% step %}

### Unit into programming mode

Hold PROG on the unit until the LED flashes once per second.
{% endstep %}

{% step %}

### Press the upper left button

Press the **upper left button** of the controller once. This programs the mode, and the buttons of the controller get their colours automatically.
{% endstep %}

{% step %}

### Finish

Short press PROG (< 1 s). The LED goes out.
{% endstep %}
{% endstepper %}

With system units (RF Touch, RF Pilot, eLAN-RF-003, eLAN-RF-Wi-003) use the **underlined RF address 1** printed on the front of the unit.

### Use it — RF RGB

| You do                           | The strip does                                         |
| -------------------------------- | ------------------------------------------------------ |
| Short press of button 1, 2 or 3  | Switches that colour on (at its set brightness) or off |
| Long press of button 1, 2 or 3   | Sets the brightness of that colour                     |
| Short press of button 4 (MASTER) | Switches all colours on or off together                |
| Long press of button 4 (MASTER)  | Sets the brightness of all colours together            |

### Use it — RF COLOR

| You do                                                               | The strip does                                                                         |
| -------------------------------------------------------------------- | -------------------------------------------------------------------------------------- |
| Long press of button 1, 2 or 3                                       | Starts "spilling" through the colours. Release when you like the colour — it is stored |
| Short press of button 1, 2 or 3                                      | Switches the stored colour on or off                                                   |
| Short press of button 4 (MASTER)                                     | Switches on or off the colour set by the RED, GREEN, BLUE potentiometers on the unit   |
| Short press of one button (1, 2 or 3), then a long press of button 4 | Sets the brightness of the selected colour                                             |

### CIRCUS function

In RF RGB and RF COLOR mode the strip can spill through the RGB colours by itself. On a controller, **press the upper right and the lower left button together, briefly** (the order of releasing does not matter). Press any button to stop it — this also returns the unit to the RF RGB / RF COLOR mode. With system units, see the manual of the system unit.

## Pair three single-colour strips (RF WHITE)

Each of the three channels is paired on its own, like a separate dimmer. **The MODE switch decides which channel you are pairing:**

| To pair channel | Set MODE to  |
| --------------- | ------------ |
| 1               | RF WHITE     |
| 2               | THERM 0–10 V |
| 3               | THERM 1–10 V |

**When you have finished pairing, set the MODE switch back to RF WHITE** (for channels 2 and 3). In RF WHITE mode the unit controls channels 1, 2 and 3 with the RF addresses **1, 2 and 3** printed on the front.

{% stepper %}
{% step %}

### Choose the channel

Set the MODE switch as in the table above.
{% endstep %}

{% step %}

### Controller into pairing mode

Hold the controller's pairing button 1 s (red LED short blink).
{% endstep %}

{% step %}

### Unit into programming mode

Hold PROG until the LED flashes once per second.
{% endstep %}

{% step %}

### Choose the function

Press the controller button **1 to 8 times, about 1 s apart**. The functions are the same as on all dimmers — see the [Dimmers](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers.md) page. RF WHITE works with the RFWB-20, RFWB-40, RF KEY, RFIM-20 and RFIM-40, and with the system units.
{% endstep %}

{% step %}

### Finish

Short press PROG (< 1 s). The LED shows the memory-function setting. Then set MODE back to RF WHITE.
{% endstep %}
{% endstepper %}

For sunrise and sunset (5× and 6×): after the presses, hold PROG more than 5 s, wait for the time you want the fade to take (2 s to 30 min), press the same controller button once, then short press PROG. Counting starts when you release PROG.

## THERM 0–10 V and THERM 1–10 V

In these modes the unit follows an analogue 0–10 V or 1–10 V signal — for example from the DAC3-04M or DAC3-04B of the iNELS BUS system — and drives one RGB strip or three single-colour strips. Set the MODE switch to the mode you need. For the iNELS BUS side, see the manual and datasheet of the RFDA-73M/RGB.

## Memory of brightness

* **The brightness you set** (RF WHITE, scenes 1–4): when you let go of the button after a long press, the brightness is stored. Later short presses switch on and off to that level, and it is kept after a power cut. When the unit is switched off, the set level is stored and returns when it is switched on again.
* **The state after a power cut (memory function).** To change it: hold PROG until the LED flashes once per second (programming mode), then short press PROG (< 1 s). This **reverses** the setting and leaves programming mode. The LED shows the new setting: **3 blinks = on**, **one long light = off**.

| Setting                  | After a power cut                                        |
| ------------------------ | -------------------------------------------------------- |
| On — functions 1–4, 7, 8 | Returns to the last state (saved 15 s after each change) |
| On — functions 5–6       | Goes to the state it would have at the end of the fade   |
| Off                      | Stays off when the power returns                         |

Clearing does not change the memory-function setting.

## Clear and factory reset

**One button.** Hold PROG **5 s** — the LED flashes 4× per second. Press the controller button to remove. One long flash confirms.

**Whole memory.** Hold PROG **8 s** — LED flashes 4× per second. All buttons are removed and the unit stays in programming mode (LED flashes every 0.5 s, up to 4 minutes). Short press PROG to leave.

## Use with eLAN-204 and service tools

* The **RF addresses printed on the front** (1, 2, 3; address 1 underlined) are used to program the unit from system units and to add it to a gateway such as the [eLAN-204](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/system-units/elan-204.md): address 1 in RF RGB and RF COLOR mode, addresses 1, 2 and 3 in RF WHITE mode.
* The repeater function can be set with the RFAF/USB service device. If the signal is weak, use the repeater RFRP-20 / RFRP-20N.

## LED reference

| LED                                  | Meaning                                                  |
| ------------------------------------ | -------------------------------------------------------- |
| Un (green)                           | Supply is on                                             |
| STATUS (red) flashes once per second | Programming mode                                         |
| Lights briefly at each press         | Command received                                         |
| Flashes twice per second             | Timing mode                                              |
| Flashes 4× per second                | Clear mode                                               |
| Flashes every 0.5 s                  | Memory cleared, waiting in programming mode (max. 4 min) |
| 3 blinks / one long light            | Memory function on / off                                 |

## Troubleshooting

| Symptom                                                 | Fix                                                                                                                    |
| ------------------------------------------------------- | ---------------------------------------------------------------------------------------------------------------------- |
| Controller button does nothing in RF RGB / RF COLOR     | Only four-button controllers (RFWB-40, RF KEY, RFIM-40) and the listed system units work in these modes                |
| Wrong channel answers in RF WHITE                       | MODE was not on the right position when you paired. Clear the button and pair again                                    |
| RF WHITE channels 2 and 3 stopped working after pairing | MODE was left on THERM — set it back to RF WHITE                                                                       |
| LED flashes 4× per second when you try to pair          | PROG held too long (5 s = clear). Release, wait, and hold again                                                        |
| Wrong function after pairing                            | Presses too fast. Keep about 1 s between presses; clear and pair again                                                 |
| Strip flickers or dims unevenly                         | Adjust the FREQ potentiometer (PWM frequency)                                                                          |
| Works close by, not in place                            | Range — see [How programming works § Range](https://wiki.inels.com/inels-home/inels-wireless/how-programming-works.md) |

## Technical parameters

|                                 |                                                                                      |
| ------------------------------- | ------------------------------------------------------------------------------------ |
| Supply                          | 12–24 V DC, stabilised (terminals Un+, GND)                                          |
| Max. power without load         | 0.8 W                                                                                |
| Loads                           | LED strips 12 V, 24 V with common anode; RGB LED strips 12 V, 24 V with common anode |
| Channels / rated / peak current | 3 / 3 × 5 A / 3 × 10 A                                                               |
| Switching voltage               | Un (the supply voltage)                                                              |
| Wireless                        | RFIO2, up to 32 channels (buttons), 866–922 MHz                                      |
| External signal                 | 0–10 V, 1–10 V                                                                       |
| +10 V output                    | max. 10 mA                                                                           |
| Range                           | up to 160 m in open space                                                            |
| Operating temperature           | −20 to +50 °C (storage −30 to +70 °C)                                                |
| Position / mounting             | any / DIN rail EN 60715                                                              |
| Protection / pollution degree   | IP20 from the front panel / 2                                                        |
| Terminals                       | max. 1 × 2.5 mm², 2 × 1.5 mm² with sleeve                                            |
| Dimensions / weight             | 90 × 52 × 65 mm / 130 g                                                              |
| Standards                       | EN 60730, EN 63044, EN 300 220, EN 301 489                                           |

## Downloads

* [Instruction manual RFDA-73M/RGB (PDF)](https://www.elkoep.com/media/import/Elko/RFx/RFDA-73M/EN/Manual_RFDA-73M.pdf)
* [Datasheet (PDF)](https://www.elkoep.com/media/import/Elko/RFx/RFDA-73M/EN/Datasheet_RFDA-73M_RGB.pdf)
* Product page: [RFDA-73M/RGB](https://www.elkoep.com/dimmer-rfda-73mrgb)
