> For the complete documentation index, see [llms.txt](https://wiki.inels.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers.md).

# Dimmers

Dimmers for lamps, LED strips, 0-10 V devices and DALI — which page to open for your unit, and how the dimmer functions (scenes, sunrise, sunset, long press, memory of brightness) work.

*Part 3 — Unit reference · Dimmers.*

A **dimmer** is a receiver that does not only switch a light on and off, but also sets **how bright** it is. You pair a dimmer exactly like any other receiver ([How programming works](https://wiki.inels.com/inels-home/inels-wireless/how-programming-works.md)): put the controller and the dimmer into programming mode, then press the controller button the **number of times that chooses the function**. On dimmers there are **eight** functions instead of six.

## Which page for which unit?

| Page                                                                                                                                                        | Units                        | What it is                                                                                                      | Load                        |
| ----------------------------------------------------------------------------------------------------------------------------------------------------------- | ---------------------------- | --------------------------------------------------------------------------------------------------------------- | --------------------------- |
| [RFDEL-71B-SL / RFDEL-71M](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfdel-71b-sl-rfdel-71m.md)           | RFDEL-71B-SL, RFDEL-71M      | Universal dimmer, 1 channel. Small box version, and DIN-rail version (also 0(1)–10 V and potentiometer control) | 300 W / 600 W               |
| [RFDEL-76M](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfdel-76m.md)                                       | RFDEL-76M                    | Universal dimmer, 6 channels, DIN rail                                                                          | 150 VA per channel          |
| [RFDA-73M/RGB](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfda-73m-rgb.md)                                 | RFDA-73M/RGB                 | Dimmer for 12–24 V LED strips: one RGB strip or three single-colour strips                                      | 3 × 5 A                     |
| [RFDSC-71N](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfdsc-71n.md)                                       | RFDSC-71N                    | Dimming socket-plug — plugs into a wall socket                                                                  | 200 W                       |
| [RFDAC-71B-SL](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfdac-71b-sl.md)                                 | RFDAC-71B-SL                 | Analog controller with a 0(1)–10 V output. **Pairs differently**                                                | 0(1)–10 V output, relay 8 A |
| [RFDALI-04B-SL / RFDALI-32B-SL](https://wiki.inels.com/inels-home/inels-wireless/technical-manual-devices/receivers/dimmers/rfdali-04b-sl-rfdali-32b-sl.md) | RFDALI-04B-SL, RFDALI-32B-SL | Controller for a DALI bus with 4 / 32 DALI devices                                                              | 4 / 32 DALI devices         |

## The eight functions

While the dimmer is in programming mode, the **number of presses** of the controller button (about 1 s apart) chooses what that button will do.

| Presses | Function      | Short press                                                              | Long press                                                |
| ------- | ------------- | ------------------------------------------------------------------------ | --------------------------------------------------------- |
| **1×**  | Light scene 1 | On or off, at the stored brightness                                      | Adjusts the brightness (more than 0.5 s)                  |
| **2×**  | Light scene 2 | On or off, at the stored brightness                                      | Adjusts the brightness — only when held **more than 3 s** |
| **3×**  | Light scene 3 | On or off, at the stored brightness (with a 3 s fade, see below)         | Adjusts the brightness (more than 0.5 s)                  |
| **4×**  | Light scene 4 | On or off, at the stored brightness (with a 3 s fade out, see below)     | Adjusts the brightness (more than 0.5 s)                  |
| **5×**  | Sunrise       | The light brightens slowly to full over the time you set (2 s to 30 min) | —                                                         |
| **6×**  | Sunset        | The light dims slowly to off over the time you set (2 s to 30 min)       | —                                                         |
| **7×**  | On / off      | Switches on if it is off, off if it is on                                | —                                                         |
| **8×**  | Switch off    | Switches the light off                                                   | —                                                         |

Leave **about 1 second between presses**. If a button ends up with the wrong function, clear it and pair it again (PROG times: see the unit page and [Appendix A](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-a-prog-button-times.md)). The same list is in [Appendix B](https://wiki.inels.com/inels-home/inels-wireless/appendices/appendix-b-functions-by-number-of-presses.md).

### Long press = dim

A **short press** switches the light on or off. A **long press** changes the brightness smoothly for as long as you hold the button. **When you release, that brightness is stored** (see "Memory of brightness" below). You can change it again at any time with another long press.

* **Scenes 1, 3 and 4:** a press longer than **0.5 s** already counts as a long press.
* **Scene 2:** a press shorter than **3 s** only switches on and off. Dimming starts only after you hold the button for **more than 3 s**. Use scene 2 when people tend to hold buttons by accident, so that the light is not dimmed unintentionally.
* **Wired buttons** (where the unit has an input for one) behave the same as wireless ones: short press (under 0.5 s) switches on to the stored brightness or off, long press (over 0.5 s) adjusts, and the level is stored on release.

### What is different in scenes 3 and 4

Scenes 1, 3 and 4 differ in the fade of the short press:

|             | Short press, light is off       | Short press, light is on   |
| ----------- | ------------------------------- | -------------------------- |
| **Scene 1** | Switches on                     | Switches off               |
| **Scene 3** | Brightens smoothly over **3 s** | Dims smoothly over **3 s** |
| **Scene 4** | Switches on                     | Dims smoothly over **3 s** |

The long press (adjusting the brightness) is the same in all three.

### Sunrise and sunset — set the time by measuring it

The time (2 s to 30 min) is not typed in; you **measure it**:

{% stepper %}
{% step %}

### Choose the function

Put the dimmer into programming mode and press the controller button **5 times** (sunrise) or **6 times** (sunset), about 1 s apart.
{% endstep %}

{% step %}

### Start the timing

Hold PROG on the dimmer **more than 5 s**. The LED flashes twice per second — timing mode. **Counting starts when you release PROG.**
{% endstep %}

{% step %}

### Wait

Wait as long as you want the full fade to take (2 s to 30 min).
{% endstep %}

{% step %}

### Store the time

Press the **same controller button** once. The time is stored.
{% endstep %}

{% step %}

### Finish

Short press PROG (< 1 s).
{% endstep %}
{% endstepper %}

After that, one press of the button starts the fade: sunrise goes from dark to bright, sunset from bright to off, taking the time you measured.

## Memory of brightness

Dimmers remember two different things.

1. **The brightness you set.** On scenes 1–4, when you let go of the button after a long press, the dimmer stores that level. The next short presses switch the light on and off **to that stored level**. The dimmer keeps it **even after the power is switched off**.
2. **What the light does when the power returns — the "memory function".** It is a setting of the unit that you can turn on or off. After programming, the LED shows it: **3 blinks = on**, **one long light = off**. To change it, hold PROG until the LED flashes once per second (programming mode) and then short press PROG (< 1 s) — each time you do that, the setting flips. With the memory function **on**, functions 1–4, 7 and 8 return to their last state (saved 15 s after each change) and functions 5–6 go to the state they would have at the end of the fade. With it **off**, the light stays off when the power returns. Clearing buttons does not change this setting.

## PROG button times at a glance

Hold PROG until the LED shows the mode you want. The times differ per unit.

| Unit                                             | Enter programming                               | Clear one button                          | Clear whole memory       |
| ------------------------------------------------ | ----------------------------------------------- | ----------------------------------------- | ------------------------ |
| RFDEL-71B-SL, RFDEL-71M, RFDEL-76M (per channel) | Hold PROG until the LED flashes once per second | 5 s                                       | 8 s                      |
| RFDA-73M/RGB                                     | Hold PROG until the LED flashes once per second | 5 s                                       | 8 s                      |
| RFDSC-71N                                        | Hold PROG until the LED flashes once per second | 5 s                                       | 8 s                      |
| RFDALI-04B-SL, RFDALI-32B-SL                     | Hold PROG until the LED flashes once per second | 5 s                                       | 8 s                      |
| RFDAC-71B-SL                                     | Hold PROG until the LED flashes once per second | Follow the LED — see the page of the unit | See the page of the unit |

{% hint style="info" %}
**RFDAC-71B-SL** is paired differently from the other dimmers. Follow the LED, as described on its page.
{% endhint %}

## Good to know

* **Use only dimmable lamps.** Energy-saving lamps and LED lamps that are not marked dimmable cannot be dimmed. Do not mix different kinds of light on one dimmer.
* **Set the light type and the minimum brightness** once at installation — this stops LED and ESL lamps flickering at low levels. A wrong light type changes how the light dims and can overheat the dimmer.
* **Load ratings** are given at power factor 1. Dimmable LED and ESL lamps have a power factor between 0.95 and 0.4, so the real maximum is the rated load multiplied by that factor. Each unit page has the rating.
* Keep **at least 1 cm** between units, and do not mount them in a metal switchboard.
