Installation, Setup, and Operation Guide
Video Guide
Written Guide
Let’s begin with the easy setup of your RFTC-6 glass zone thermostat. In just a few simple steps, you’ll learn how to power it on, connect it to Wi-Fi, register it in the iNELS app, and get everything ready for comfortable and efficient control of your heating and cooling system
Connect your Thermostat
Installation
Connect the thermostat to 110–230 V AC mains.
Live (L) → Terminal L, Neutral (N) → Terminal N.
Optionally connect an external temperature sensor.
Mount the thermostat on a standard electrical wall box.
App Registration
Download the iNELS app (App Store / Google Play).
Create an account or log in.
Go to Gateway Administration → Add Gateway.
Identify the RFTC-6 by its IP/MAC address.
Enter default login credentials (changeable later).
Once added, RFTC-6 appears under Gateway Settings.
Wi-Fi Setup
Open Wi-Fi settings and connect to the network RFTC6.
Default password: elkoep_6.
Open browser → enter 192.168.1.1 → open Service Tab → activate Client Mode.
Reconnect to your home Wi-Fi network.
Add devices and create rooms
Add devices by entering their RF address (on product label).
Create rooms (Living Room, Kitchen, Bathroom).
Assign devices to each room.
Build up in app (heating plan, zones, central source)
Temperature Plans
Set up your temperature modes: comfort, normal, attenuation, and minimum. The temperature of each mode can be freely edited to match your preference. For each plan, set the timestamps — the exact times during the day when a specific temperature mode should be active — and select the days of the week when the plan should apply. You can prepare a unique plan for each room individually, so the living room, kitchen, and bathroom can all have their own schedule with different temperature settings.
Heating & Cooling Areas
Once your temperature plans are ready, proceed to define the heating and cooling areas.
Add the temperature sensor of the RFTC-6 and the temperature plan for the living room.
Select the heating unit’s thermo valve of the radiator that is located in the living room.
Add the living room heating area into the living room section.
Create three areas — Living Room, Kitchen, and Bathroom.
Each heating area can be linked to its own plan and assigned to a specific room.
Assign all heating areas to the correct rooms in your app.
This setup ensures that every zone in your home has its own customized schedule and precise temperature control.
Adjust the thermostat functions via app or web interface
App Control
You will be able to see all your devices, rooms, and heating or cooling areas directly in the app.
Each room can be controlled individually, allowing you to adjust temperature settings as needed.
You can switch between temperature modes and choose among program modes such as Automatic, Holiday, Permanent Manual, or Temporary Manual.
Using the buttons on the front panel, you can easily switch between heating zones.
The display shows the active zone, where you can adjust the temperature and settings.
The system supports up to 16 zones, providing flexible and efficient management of your entire home.
Cloud Access
The RFTC6 can be controlled via the iNELS Cloud through a web browser.
After entering your login credentials, the RFTC6 controls will appear in the Rooms folder.
You can adjust temperature modes, operate control buttons, and use the plus or minus buttons to change the temperature.
The iNELS Cloud service is free and allows remote control of your RFTC6.
When connected to the cloud, you can access your devices from anywhere — both at home on the same Wi-Fi and remotely while away.
This ensures full control of heating, cooling, and automation at any time and from any location.
Last updated