For the complete documentation index, see llms.txt. This page is also available as Markdown.

Appendix B: Functions by number of presses

Which function a unit gets depending on how many times you press the controller button while the unit is in programming mode.

Appendices. Used in the "choose the function" step of every pairing procedure.

While a unit is in programming mode, the number of times you press the controller button chooses the function that button will have.

Switch units, multi-function

RFSA-61B, RFSA-62B, RFSA-61M, RFSA-61MI, RFSA-66M, RFSA-66MI, RFSAI-61B-SL, RFSAI-62B-SL, RFSC-61N, RFUS-61.

Presses
Function
What the output does
Graph

1×

Pushbutton

On while the button is held, off when released

2×

Switch on

Every press switches on

3×

Switch off

Every press switches off

4×

Impulse relay (toggle)

Each press switches to the opposite state

5×

Delayed off

A press switches on; it switches off by itself after the set time (2 s – 60 min)

6×

Delayed on

A press switches off; it switches on by itself after the set time (2 s – 60 min)

For pushbutton (1×) leave at least 1 s between press and release.

Setting the time for delayed off (5×) and delayed on (6×)

The time is set by measuring it:

  1. Put the unit into programming mode and press the controller button 5× (or 6×), about 1 s apart.

  2. Hold PROG more than 5 s — timing mode, LED flashes twice per second. Timing starts when you release PROG.

  3. Wait for the time you want (2 s – 60 min).

  4. Press the same controller button once. The time is stored.

  5. Short press PROG (under 1 s) to finish.

Switch units,single function

RFSAI-11B-SL and RFSA-11B have one function only — ON/OFF — so you do not count presses. Program the upper button of a rocker; the button below it is assigned OFF automatically. The external-button input of the RFSAI-11B-SL has a fixed function and is not programmed.

Dimmers

RFDA-73M/RGB, RFDEL-71B-SL, RFDEL-71M, RFDSC-71N, RFDAC-71B, RFDW-71.

Presses
Function
What the light does
Graph

1×

Light scene 1

Short press: on/off at the stored brightness. Long press: adjust. Kept after a power cut

2×

Light scene 2

Short press: on/off at the stored brightness. Hold more than 3 s: adjust. Kept after a power cut

3×

Light scene 3

Short press: on/off at the stored brightness. Long press: adjust. Kept after a power cut

4×

Light scene 4

Short press: on/off at the stored brightness. Long press: adjust. Kept after a power cut

5×

Sunrise

A press brightens the light gradually over the set time (2 s – 30 min)

6×

Sunset

A press dims the light gradually over the set time (2 s – 30 min)

7×

On / off

A press switches on if off, off if on

8×

Switch off

A press switches the light off

Sunrise and sunset times are set the same way as delayed off/on above. Scenes 3 and 4 add a short fade of about 3 s when switching — details for each dimmer are on the Dimmers page.

Shutter units

Shutter units do not count presses: the first button you press becomes up, and the other half of the same rocker becomes down automatically. See Pairing reference — shutter units and Shutter units.


See also: Appendix A — PROG button times

Last updated