Basic Information

Power Supply:

110–230 V AC

Network Connection:

• MB-1 has a Wi-Fi interface (2.4 GHz).

• Maximum number of connected RF devices is 20.

• For the initial connection, you need to connect to the access point (AP) created by the device in setup mode.

• AP name: MiniBridge_SN

• AP password: elkoep_1

• Default IP address of the device in AP mode: 192.168.1.1

• After connecting to the AP, open the web interface in a browser at http://192.168.1.1

– no password is required for access.

---

Prog Button

• If the button is held for less than 750 ms, the relay turns On/Off.

• If held for more than 750 ms but less than 2500 ms, it changes the relay channel.

• If held for more than 2500 ms but less than 5000 ms, it activates key fob learning and function assignment.

• If held for more than 5000 ms but less than 8000 ms, it activates delay-off and delay-on time learning.

• If held for more than 8000 ms but less than 11000 ms, it deletes one button.

• If held for more than 11000 ms but less than 15000 ms, it deletes all learned buttons.

• If held for more than 15000 ms but less than 19000 ms, it turns the Wi-Fi Access Point On/Off.

• If held for more than 19000 ms but less than 25000 ms, it performs a factory reset.

---